how to use the jewelry ultrasonic cleaner and maintaince

OPERATION INSTRUCTION

1. Open the lid of the device and place the object into the cleaning container, and then fill with water. (The water should cover the object but not exceed the MAX mark)

Running without water can damage the unit

2.Close the lid. Plug in unit to electric outlet, the LED timer will be flashing in two seconds.

3. Press timer button to choose different working time, which will be shown from 180s-280s-380s-480s-90s), please press POWER button to start cleaning after you select a cleaning time.

4. After the selected cleaning time (180s-280s-380s-480s-90s), the product automatically stops. For another cleaning cycle, just repeat above process. (However, we recommend that you wait at least 5 minutes between cleaning processes)

5. After the cleaning has been finished, Please turn off the unit and unplug the unit. Open the lid and remove the cleaned object from the device.

Three cleaning methods (in different situations)

1．General Cleaning

Use just simple water for general cleaning (the water should cover the item but not exceed the Max mark)

2．Enhanced Cleaning

For special cleaning, add a few drops of cleaning liquid to enhance cleaning.

3．Partial Cleaning

To clean parts of large items, the device can be used with the lid open, as shown in the picture.